Tires and Wheels Inspection

Select Tires and Wheels Inspection from Safety Systems Inspection Modules

Select the Tires and Wheels Result for the inspection:

Tires and Wheels Result: Pass
Tires and Wheels Result: Fail

Select Pass to continue to enter passing vehicle information regarding the performed tires and wheels inspection.

Tire Inflation

Enter Tire Inflation data into all available fields. Please note the displayed options may be different from what
is shown below; within a given screen, only options appropriate for the vehicle's configuration and type are displayed.

Note: All available fields will only allow numerical values (0-999).

Select Back to return to the previous screen.
Select Continue to proceed.

Tires and Wheels Inspection: Fail

Select Fail to continue to enter failure data regarding the performed tires and wheels inspection.

Tires and Wheels Failure Data

Enter Tires and Wheels failure data as it applies to the inspected vehicle. Please note the displayed options may be different from what
is shown below; within a given screen, only options appropriate for the vehicle's configuration and type are displayed.

Note: At least one failure from any of the previous screens is required to complete the tires and wheels inspection.

Note: A drop down will not become active unless the associated checkbox is checked. Active drop downs must have a selection.
If Other is selected as the drop-down option, an additional text box is displayed in which you must enter a description of the
component failure up to 100 characters.

Select Back to return to the previous screen.
Select Continue to proceed.

No Failure Selected

The following screen is displayed if the user did not enter any failure data for the vehicle after determining the vehicle failed the tires and wheels inspection.

Click here to return to the top of this page and repeat the steps necessary to complete the tires and wheels inspection.