Select Passenger Compartment Insp from Safety Systems Inspection Modules

Select the Passenger Compartment Result for the inspection:

• Passenger Compartment Result: Pass
• Passenger Compartment Result: Fail

Passenger Compartment Inspection: Pass

Select Pass to continue to enter failure data regarding the performed passenger compartment inspection.

Total Occupancy

Enter Total Occupancy data into the available field.

Note: All available fields require an entry.

Note: All available fields will only allow numerical values (0-999).

• Select Back to return to the previous screen.
• Select Continue to proceed.

Back to Top

Passenger Compartment Inspection: Fail

Select Fail to continue to enter failure data regarding the performed passenger compartment inspection.

Passenger Compartment Failure Data

Enter Passenger Compartment  failure data as it applies to the inspected vehicle. Please note the displayed options may be different from what
is shown below; within a given screen, only options appropriate for the vehicle's configuration and type are displayed.

Note: At least one failure is required to complete the passenger compartment inspection.

Note: A drop down will not become active unless the associated checkbox is checked. Active drop downs must have a selection.
If Other is selected as the drop-down option, an additional text box is displayed in which you must enter a description of the
component failure up to 100 characters.

• Select Back to return to the previous screen.
• Select Continue to proceed.

Back to Top

No Failure Selected

The following screen is displayed if the user did not enter any failure data for the vehicle after determining the vehicle failed the passenger compartment inspection.

Click here to return to the top of this page and repeat the steps necessary to complete the passenger compartment inspection.