Light Inspection

Select Light Inspection from Safety Systems Inspection Modules

Select the Light Result for the inspection:

Light Result: Pass
Light Result: Fail

Light Inspection: Pass

Select Pass to continue to enter passing vehicle information regarding the performed light inspection.

Headlight Aim Test Device

Select the Headlight Aim Test Device from the drop down list.

The screen reflects the selected Headlight Aim Test Device.

Select Back to return to the previous screen.
Select Continue to proceed.

Light Inspection: Fail

Select Fail to continue to enter failure data regarding the performed light inspection. The interface will present failure options
appropriate to the inspected vehicle type:

Front, Side, and Rear Lamps Failure Data
Other Lights Failure Data

Please note the displayed options may be different from what is shown below; within a given screen, only options appropriate for the
vehicle's configuration and type are displayed.

Front, Side, and Rear Lamps Failure Data

Enter Front, Side, and Rear Lamps failure data as it applies to the inspected vehicle.

Note: If none of the failures on this screen apply to the vehicle, continue to the next screen

Note: A drop down will not become active unless the associated checkbox is checked. Active drop downs must have a selection.
If Other is selected as the drop-down option, an additional text box is displayed in which you must enter a description of the
component failure up to 100 characters.

Select Back to return to the previous screen.
Select Continue to proceed.

Other Lights Failure Data

Enter Other Lights failure data as it applies to the inspected vehicle.

Note: If none of the failures on this screen apply to the vehicle, continue to the next screen

Select Back to return to the previous screen.
Select Continue to proceed.

Note: At least one failure from any of the previous screens is required to complete the light inspection.

No Failure Selected

The following screen is displayed if the user did not enter any failure data for the vehicle after determining the vehicle failed the light inspection.

Click here to return to the top of this page and repeat the steps necessary to complete the light inspection.